Summit X770 Series Switch LEDs

The following sections describe the meanings of the LEDs on the Summit X770 series switches.

Table 1. X770 Front Panel LEDs
Label or Type Color/State Meaning
M (Management) Slow blinking green (1 Hz) Normal operation
Fast blinking green (2 Hz) Power-on self test (POST) in progress

or

Switch diagnostics are running

Steady green POST passed: system is booting image
Blinking amber System is disabled: POST failed or system overheated
Off No external power is attached
FAN

1, 2, 3, 4, 5

Steady green Normal operation.
Blinking amber Failure.
Off No power.
P1, P2

(Power Supply)

Steady green Normal operation.
Steady amber Power is attached, but no power is on.
Blinking amber Power failure.
Off No power is attached.
Ethernet Ports 40G mode 1, 5, 9, 13, 17, 21, 25, 29, 33, 37, 41, 45, 49, 50 51, 52, 53, 57, 61, 65, 69, 73, 77, 81, 85, 89, 93, 97, 101, 102, 103, 104 Steady blue Link OK.
Blinking blue Activity on the indicated port.
Off No link or port disabled.
Ethernet Ports 10G mode 1-104 Steady green Link OK
Blinking green Activity on the indicated port
Off No 10G link or port disabled.
Table 2. 2-digit Stack Number Indicator
Label or Type Color/State Meaning
Left digit (1) Reserved for future use.
Right digit (1 – 8) Indicates the position of this switch in the SummitStack configuration.
Upper half blinking This switch is the stack master node.
Lower half blinking This switch is the stack backup node.
Lit steadily This switch is a standby node in the stack.
Stacking Ports 40G mode

(V160 and V320 stacking) ports 101, 102, 103, and 104

Steady blue Link OK
Blinking blue Activity
Off No link or port disabled.
Stacking Ports 10G mode (Alternate stacking) ports 103 and 104 Steady green Link OK
Blinking green Activity
Off No link or port disabled