Installing an STK-RPS-1005PS in a Rack

To install the STK-RPS-1005PS in the three-slot modular shelf (STK-RPS-1005CH3), you must first install the shelf in a 19-inch rack.

Caution

Caution

Observe all ESD precautions when handling sensitive electronic equipment.
Caution

Caution

Before rack-mounting the device, ensure that the rack can support it without compromising stability. Otherwise, personal injury and/or equipment damage may result.

To install the STK-RPS-1005PS in a rack, follow these steps.

  1. Secure the front of the three-slot modular shelf (STK-RPS-1005CH3) to the rack by screwing four rack screws into the mounting ears on the right and left front of the shelf.
    See Securing the Three-slot Modular Shelf to a Rack.
    Click to expand in new window
    Securing the Three-slot Modular Shelf to a Rack
  2. Slide the power supply into an empty bay in the shelf.
    See Installing an STK-RPS-1005PS Power Supply Unit in a Shelf.
    Click to expand in new window
    Installing an STK-RPS-1005PS Power Supply Unit in a Shelf
  3. Tighten the captive screws to secure the power supply to the shelf.
  4. Connect the STK-RPS-1005PS to its power source.
    See Connecting the RPS Cable and AC Power Cord to an STK-RPS-1005PS.
121137-05 Rev. 03