For instructions for installing a V400 Virtual Port Extender, refer to Installing a V400 Virtual Port Extender.
To replace a V400 Virtual Port Extender or remove it from service, follow these
steps:
-
Disconnect the port extender
from its power source and, if applicable, from its redundant power supply.
-
Support the port extender while
you remove the rack-mounting screws that hold the front mounting brackets in
place against the rack posts.
-
Carefully slide the port
extender out of the rack.
-
Place the port extender on a
secure, flat surface.
Optionally, remove the mounting
brackets from the sides.
-
Install a new port extender
using the instructions in Installing a V400 Virtual Port Extender.