Top-of-Rack Stack Installation shows five switches installed at the tops of five adjacent racks. To accommodate the shortest possible cables, immediately adjacent switches are not always connected together. Port 2 on one switch is connected to Port 1 on the next connected switch. If the easy setup feature is used to configure the stack parameters, the assigned slot numbers will be as shown in the figure.
Connect this slot and port . . . | . . . To this slot and port | ||||
---|---|---|---|---|---|
Slot 1 | Rack A | Port 2 | Slot 2 | Rack B | Port 1 |
Slot 2 | Rack B | Port 2 | Slot 3 | Rack D | Port 1 |
Slot 3 | Rack D | Port 2 | Slot 4 | Rack E | Port 1 |
Slot 4 | Rack E | Port 2 | Slot 5 | Rack C | Port 1 |
Slot 5 | Rack C | Port 2 | Slot 1 | (Rack A | Port 1 |