Summit X770-32q Switch Ports and Slots
The front panel of the Summit X770-32q switch includes:
32 40-gigabit Ethernet ports capable of supporting passive
copper QSFP+ and active fiber QSFP+.With quad fan-out SFP+
cables, the QSFP+ ports can be partitioned into 10-gigabit data lanes: 24 of the
ports can be partitioned into four 10-gigabit data lanes, and the remaining
eight ports can be used as single 10-gigabit data lanes. This yields a total of
104 10-gigabit ports as shown in X770 Port Numbers for 10G mode and 40G
Mode :
X770 Port Numbers for 10G mode and 40G
Mode
For information about QSFP+ optical modules, see the Extreme Networks
Pluggable Transceivers Installation Guide .
Groups of two or four ports configurable to be stacking ports
as shown in the following table:Table 1. X770 Stacking Method and Ports
Stacking Method
Ports
SummitStack-V
103 and 104
SummitStack-V160
103 and 104
SummitStack-V-320
101 and 103, 102 and 104
When ports are used for stacking they are not available for normal Ethernet
connectivity. For more information about stacking, see Building Stacks .
Management port (10/100/1000-Mbps).
Front panel USB port for access to external storage.
RJ45 RS-232c serial console port used to connect a terminal and
perform local management.
LEDs to indicate port status and switch operating conditions.
For a description of the LEDs and their operation, see Summit X770 Series Switch LEDs .
Stack number indicator.
1 = USB port
4 = 40G/10G QSFP+ Ethernet ports
2 = Stack number indicator
5 = Console port
3 = Management port
6 = Stacking ports
The rear panel of the Summit X770-32q switch includes:
Five replaceable fan modules
Two power supply bays for either AC or DC power supplies
(see Summit 550 W AC and DC Power Supplies ).
Two mini-BNC connectors labeled OUT for connecting a
Building Integrated Timing Supply (BITS) or GPS timing source:
1 PPS frame output
10 MHz output
1 = Fan modules
3 = mini-BNC connectors
2 = Power supply