STK-RPS-1005PS Redundant Power Supply Technical Specifications

The following tables list the specifications for the 1005 W PoE+ Redundant Power supply unit (model STK-RPS-1005PS) .
Table 1. Physical Specifications
Dimensions 4.3 H x 15.4 W x 34.0 D (cm) 1.7 H x 6.1 W x 13.4 D (in.)
Weight (unit only) 2.1 kg (4.6 lb)
Weight (unit and packaging) 3.5 kg (7.8 lb)
Table 2. Power Specifications
AC input frequency range 50/60 Hz
AC input voltage range 115-230 VAC
AC input current 12 A maximum at 115 VAC, 60 Hz

6.0 A maximum at 230 VAC, 50 Hz

DC output -55 VDC, 15 A maximum

+12.0 VDC, 0.1 A minimum, 15 A maximum

Maximum output power 1005 W
Table 3. Environmental Specifications
Operating temperature 0°C to 50°C (32°F to 122°F)
Storage temperature -40°C to 70°C (-40°F to 158°F)
Operating relative humidity 10% to 90% non-condensing

STK-RPS-1005PS Connector

For pin location and function, refer to STK-RPS-1005PS Connector Pin Locations and STK-RPS-1005PS Connector Pin Functions, respectively.

Note

Note

The following information is for troubleshooting purposes only. For proper operation, use only the RPS cable supplied with the STK-RPS-1005PS. This cable is specially designed for this application and meets all necessary regulatory and safety standards.
Caution

Caution

The use of non-approved cables will void your warranty.
Click to expand in new window
STK-RPS-1005PS Connector Pin Locations
1 = Pin 1 3 = Pin 10
2 = Pin 9 4 = Pin 18
Table 4. STK-RPS-1005PS Connector Pin Functions
Pin Function Pin Function
1 12 V power 10 Power good of RPS
2 12 V power 11 Power supply present
3 12 V power 12 12 V current sharing
4 Ground 13 Ground
5 Ground 14 Spare pin
6 Spare pin 15 -55 V current sharing
7 -55 V power 16 -55 V power
8 -55 V power 17 -55 V power return
9 -55 V power return 18 -55 V power return