AP OSPF Network Routes

To view OSPF network route statistics:

  1. Select the Statistics menu from the Web UI.
  2. Expand the System node from the navigation pane (on the left-hand side of the screen). The System node expands to display the RF Domains created within the managed network.
  3. Expand an RF Domain node, select a controller or service platform, and select one of its connected access points. The access point's statistics menu displays in the right-hand side of the screen, with the Health tab selected by default.
  4. Expand the OSPF menu.
  5. Select the Routes tab.
  6. Select the Network Routes tab.
    The Statistics > AP > Routes > Network Routes screen is displayed.
    Click to expand in new window
    GUID-0AA25EA6-F108-4C21-BD1D-7F91479BD3AB-low.png

    Network routes support more than two routers, with the capability of addressing a single physical message to all attached routers (broadcast). Neighboring routers are discovered dynamically using OSPF hello messages. This use of the hello protocol takes advantage of broadcast capability. An OSPF network route makes further use of multicast capabilities, if they exist. Each pair of routers on the network is assumed to communicate directly.

    The network tab displays the network name, impacted OSPF area, cost, destination and path type.

  7. Select Refresh to update the statistics counters to their latest values.