The Summit 750 W AC power supply (part no. 10931) is available for use with ExtremeSwitching X620-16p switches. It is compatible with the EPS-C2 power supply.
The Summit 750 W AC power supply is used in the EPS-C2 external power system.
Physical Specifications
|
Dimensions |
Height: 1.57 inches (4.0 cm) Width: 3.15 inches (8.0 cm) Depth: 9.5 inches (24.1 cm) |
|
Weight |
2.25 lb (1 kg) |
Power Specifications
|
Voltage input range |
85 to 264 V |
|
Nominal input ratings |
100 to 240 V |
|
Nominal input current at full loads |
10 A at 90 V 3.7 A at 230 V |
|
Line frequency range |
47 to 63 Hz |
|
Maximum inrush current |
35 A |
|
Output |
12 V 55 V 3.3 V |
|
Power supply input socket |
IEC 320 C14 |
|
Power cord input plug |
IEC 320 C13 |
|
Power cord wall plug |
Refer to Power Cord Requirements for AC-Powered Switches and AC Power Supplies. |
|
Power supply cord gauge |
18 AWG (0.75 mm2) up to 6 feet or 2 meters or 16 AWG (1.0 mm2) over 6 feet |
|
Efficiency |
Low Line: 88% at 50% load and 86% at 100% load High Line: 90% at 50% and 100% loads |
Environmental Specifications
|
Operating temperature |
0°C to 45°C (normal operation) |
|
Storage temperature |
-40°C to 70°C |
|
Operating humidity |
20% to 90% relative humidity, non-condensing |
|
Operational shock |
30 m/s2 (3 G) |
Print
this page
Email this topic
Feedback