Preface
ExtremeSwitching Switches
Power Supplies for Use with Your Switch
Expansion Modules
Site Preparation
Building Stacks
Installing Your Extreme Networks Switch
Installing External Power Supplies
Installing Expansion Modules
Replacing AC Power Supplies
Replacing DC Power Supplies
Replace Fan Modules
Removing and Replacing Expansion Modules
Removing Switches from Service
Technical Specifications
Safety and Regulatory Information

Displaying the Status of Installed Power Supplies

Using the show power command, you can view detailed information about the power supplies your switch is using. This status information may be useful for your technical support representative if you have a network problem.

The switch collects the following power supply information:

The current state of the power supply (powered off or powered on).
Whether the unit is an internal or external power supply.
Power input, output, and usage statistics.
Airflow direction (for internal power supplies).
Additional details for switches in stacked configurations.