ExtremeSwitching X460-G2-24p-24hp-10GE4 Switch Ports and Slots

X460-G2-24p-24hp-10GE4 switch ports and slots include:

24 front panel PoE+ ports of 10/100/1000BASE-T (ports 1-24) that support full-duplex communication only
24 front panel PoE+ ports of 10/100/1000BASE-T (ports 25-48) that support full-duplex communication and support half-duplex communication at speeds less than 1 Gb
Four ports of 10GBASE-X SFP+ (ports 49-52, with two of these ports configurable to be stacking ports).
One front panel USB port.
Ethernet management port 1 x 10/100/1000BASE-T.
Serial console port implemented as an RJ45 connector used to connect a terminal and perform local management.
One rear panel VIM slot.
One rear panel TM-CLK (clock) slot.
Rear dual PSU power slots with front-to-back or back-to-front airflow.
One rear slot for fan module with front-to-back or back-to-front airflow.

X460-G2-24p-24hp-10GE4 Front Panel

1 = Stack number indicator	4 = PoE+ 10/100/1000BASE-T ports
2 = Console port/Ethernet management port	5 = PoE+ 10/100/1000BASE-T ports with half-duplex
3 = USB port	6 = SFP+ 10GBASE-X ports

X460-G2-24p-24hp-10GE4 Rear Panel

Note

It is not possible to collect statistics on packet collisions for the X460-G2-24p-24hp-10GE4 switch.

Published December 2020prev | next