Preface
ExtremeSwitching Switches
Power Supplies for Use with Your Switch
Expansion Modules
Site Preparation
Building Stacks
Installing Your Extreme Networks Switch
Installing External Power Supplies
Installing Expansion Modules
Replacing AC Power Supplies
Replacing DC Power Supplies
Replace Fan Modules
Removing and Replacing Expansion Modules
Removing Switches from Service
Technical Specifications
Safety and Regulatory Information

Setting up the Physical Stack

After you have installed the individual switches (see "Installing Your Switch"), follow these steps to create the physical stack.

Connect the switches that will form the stack.
See Connecting the Switches to Form the Stack Ring.
Connect stacking cables to the switches.
See Connecting Stacking Cables.
Connect the switches to your management network.
See Connecting Your Stack to the Management Network.

After setting up and connecting the switches, perform software configuration for the stack. See "Configuring a New Stack" in the ExtremeXOS 22.6 User Guide.

Published December 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback