V400 Virtual Port Extender Technical Specifications

The following V400 Virtual Port Extender models are available:

V400-24t-10GE2 (part no. 18101)
V400-24p-10GE2 (part no. 18102)
V400-48t-10GE4 (part no. 18103)
V400-48p-10GE4 (part no. 18104)

V400 Unpackaged Dimensions

V400-24t-10GE2	Height: 1.70 in (4.32 cm) Width: 9.97 in (25.3 cm) Length: 17.34 in (44.0 cm)
V400-24p-10GE2	Height: 1.70 in (4.32 cm) Width: 9.97 in (25.3 cm) Length: 17.34 in (44.0 cm)
V400-48t-10GE4	Height: 1.70 in (4.32 cm) Width: 9.97 in (25.3 cm) Length: 17.34 in (44.0 cm)
V400-48p-10GE4	Height: 1.70 in (4.32 cm) Width: 15.25 in (38.7 cm) Length: 17.34 in (44.0 cm)

V400 Unpackaged Weight

V400-24t-10GE2	6.62 lb (3.00 kg)
V400-24p-10GE2	9.08 lb (4.12 kg)
V400-48t-10GE4	7.14 lb (3.26 kg)
V400-48p-10GE4	14.06 lb (6.38 kg)

V400 Packaged Dimensions

V400-24t-10GE2	Height: 4.49 in (11.4 cm) Width: 14.66 in (37.2 cm) Length: 22.02 in (55.9 cm)
V400-24p-10GE2	Height: 4.49 in (11.4 cm) Width: 14.66 in (37.2 cm) Length: 22.02 in (55.9 cm)
V400-48t-10GE4	Height: 4.49 in (11.4 cm) Width: 14.66 in (37.2 cm) Length: 22.02 in (55.9 cm)
V400-48p-10GE4	Height: 4.49 in (11.4 cm) Width: 19.86 in (50.4 cm) Length: 22.02 in (55.9 cm)

V400 Packaged Weight

V400-24t-10GE2	9.00 lb (4.08 kg)
V400-24p-10GE2	11.44 lb (5.19 kg)
V400-48t-10GE4	9.69 lb (4.39 kg)
V400-48p-10GE4	16.56 lb (7.50 kg)

Power Specifications

Note

When you use a redundant power supply (RPS), only redundant power – not additive power – is supported. Thus, the PoE ports load does not increase when an RPS is added.

V400 Power Options

V400-24t-10GE2	AC Input: 100-240 VAC, 50/60 Hz, 0.6 A max
V400-24p-10GE2	AC Input: 100-240 VAC, 50/60 Hz, 2.2 A max DC RPS input: 54 VDC, 18.52 A max PoE ports load to 382 W for AC input only. PoE ports load to 720 W for DC input only. PoE ports load to 720 W for AC+DC input.
V400-48t-10GE4	AC Input: 100-240 VAC, 50/60 Hz, 1.0 A max
V400-48p-10GE4	AC Input: 100-240 VAC, 50/60 Hz, 12.0 - 6.0 A max DC RPS input: 54 VDC, 18.52 A max PoE ports load to 740 W for AC input only. PoE ports load to 900 W for DC input only. PoE ports load to 1440 W for AC+DC input.

Power Specifications

	Minimum¹ Heat Dissipation (BTU/hr)	Minimum¹ Power Consumption (Watts)	Maximum¹ Heat Dissipation (BTU/hr)	Maximum¹ Power Consumption (Watts)
V400-24t-10GE2	36.1	10.6	75.2	22.1
V400-24p-10GE2	109.8	32.2	336.8	478.7
V400-48t-10GE4	66.0	19.3	134.8	39.5
V400-48p-10GE4	168.9	49.5	583.2	910.9
VX-RPS-1000	141.3	41.4	3152.8	924

Fan and Acoustic Sound

	Bystander Sound Pressure² in dB(A)	Declared Sound Power (L_WAd)² in bels
V400-24t-10GE2	41.6 (Duty 30%) / 59.4 (max.)	4.4 (Duty 30%) / 6.2 (max.)
V400-24p-10GE2	47.5 (Duty 30%) / 64.0 (max.)	5.0 (Duty 30%) / 6.7 (max.)
V400-48t-10GE4	43.4 (Duty 30%) / 61.1 (max.)	4.6 (Duty 30%) / 6.4 (max.)
V400-48p-10GE4	48.5 (Duty 30%) / 65.5 (max.)	5.1 (Duty 30%) / 6.8 (max.)

Standards and Environmental Data

Safety Standards

North American Safety of ITE

UL 60950-1 2nd Ed., A2:2014, Listed Device (US)

CSA 22.2 #60950-1-07 2nd Ed., 2014-10 Canada)

Complies with FCC 21CFR 1040.10 (US Laser Safety)

CDRH Letter of Approval (US FDA Approval)

European Safety of ITE

EN 60950-1:2006 +A11+A1+A12+A2

EN 60825-1:2007 (Lasers Safety)

IEC 60950-1:2005 2nd+A1:2009+A2:2013

2014/35/EU Low Voltage Directive

International Safety of ITE

CB Report & Certificate per IEC 60950-1:2005 2nd Ed. + National Differences

AS/NZX 60950-1 (Australia /New Zealand)

V400 Environmental Data

Operating conditions

Temperature: 0°C to 50°C (32°F to 122°F) for non-PoE models

Temperature: 0°C to 45°C (32°F to 113°F) for PoE models

Storage and transportation temperature: -40°C to 70°C (-40°F to 158°F)

Humidity: 5% to 95% relative humidity, non-condensing

Altitude: 0 to 3,000 meters (9,850 feet)

¹ Minimum is defined as idle, with no ports linked. Maximum is defined as fans high, all ports 100% traffic.