ExtremeSwitching X590-24x-1q-2c Switch Ports and Slots

X590-24x-1q-2c switch ports and slots include:

• 24 fixed autosensing 1 Gb/10GBASE-X SFP+ ports (ports 1-24) that provide 10 Gbps copper connectivity. Two of these ports are configurable as stacking ports.
• One 40-gigabit Ethernet port capable of supporting passive copper QSFP+ and active fiber QSFP+ and configurable for 1x40 Gb or 4x10 Gb Ethernet mode.
• Two 100-gigabit Ethernet ports capable of supporting passive copper QSFP28/QSFP+ and active fiber QSFP28/QSFP+ and configurable for 100 Gb, 40 Gb, 2x50 Gb, 4x25 Gb, and 4x10 Gb modes. For information about QSFP28 and QSFP+ optical modules, see the Extreme Networks Pluggable Transceivers Installation Guide.
• Ethernet management port (10/100/1000BASE-T).
• Serial console port implemented as an RJ45 connector used to connect a terminal and perform local management.
• Front panel USB port.
• Rear dual PSU power slots with front-to-back or back-to-front airflow.
• Four rear slots for fan modules with front-to-back or back-to-front airflow.
  

  Note

  Two additional fan slots are unused. Do not remove the cover plate from the unused slots.

X590-24x-1q-2c Front Panel

X590-24x-1q-2c Rear Panel