ExtremeSwitching X450-G2-48p-10GE4 Switch Ports and Slots

X450-G2-48p-10GE4 switch ports and slots include:

48 front panel PoE+ ports of 10/100/1000BASE-T (ports 1–48).
Four front panel ports of 10GBASE-X SFP+ (ports 49–52, with ports 51 and 52 configurable to be stacking ports). The SFP+ ports are dual speed (1 Gb/10 Gb).
Front panel USB port.
Ethernet management port 1 x 10/100/1000BASE-T.
Serial console port implemented as an RJ45 connector used to connect a terminal and perform local management.
One rear slot for fan module with front-to-back airflow.
Two dedicated QSFP-form factor 21 Gb stacking ports on the rear panel.
Rear dual power supply slots with front-to-back airflow.
Note
Unused power supply slots must be covered with blank panels.

X450-G2-48p-10GE4 Front Panel

1 = Stack number indicator	4 = PoE+ 10/100/1000BASE-T ports
2 = Console port/Ethernet management port	5 = SFP+ 10GBASE-X ports
3 = USB port

X450-G2-48p-10GE4 Rear Panel

1 = 21 Gb stacking ports (QSFP+)	3 = Front-to-back fan module slot
2 = Grounding screw	4 = PoE+ power supply bays

Published December 2020prev | next