Virtual Interface Settings

To define a dynamic routing configuration:

1. Select Configuration > Profiles > Network.

2. Expand the Network menu to display its submenu options.

3. Expand the Network menu and select OSPF.

4. Select the Interface Settings tab.

   

5. Review existing Interface Settings using the following:

   Name	Displays the name defined for the interface configuration.
   Type	Displays the type of interface.
   Description	Lists each interface's 32 character maximum description.
   Admin Status	Displays whether Admin Status privileges have been enabled or disabled for the OSPF route's virtual interface connection.
   VLAN	Lists the VLAN IDs set for each listed OSPF route virtual interface.
   IP Address	Displays the IP addresses defined as virtual interfaces for dynamic OSPF routes. Zero  config and DHCP can be used to generate route addresses, or a primary and secondary address can be manually set.

6. Select the Add button to define a new set of virtual interface basic settings, or Edit to update the settings of an existing virtual interface configuration.