Print this pagePrint this page

Email this topicEmail this topic

View PDFView PDF

Download EPUBDownload EPUB

BGP State

To view BGP State statistics:
  1. Select the Statistics menu from the Web UI.
  2. Expand the RF Domain node.
  3. Select a Wireless Controller.
  4. Select BGP from the left-hand side of the UI.

    The BGP Summary screen displays by default in the right-hand pane.

  5. Select the State tab.

    The Statistics > Controller > BGP > State screen displays.

    The State screen displays the following:
    Maximum Routes Allowed Lists the maximum number of routes allowed on the selected BGP wireless controller or service platforms.
    Routes Received Lists the number of routes received from all the BGP peers.
    Current Ignore Count Lists the number of times the BGP daemon has been put in the Ignore state.
    Ignore Count Allowed Lists the maximum number of times the BGP daemon can be put in an Ignore state before entering permanent ignore state.
    Reset Time Lists the time after which ignore state count is reset to 0 and BGP daemon continues in the state it was in previously.
    Ignore Time Lists the time duration after which BGP daemon shall exit the Ignore state.
    Current State Lists the current state of this BGP route utilized on the wireless controller or service platforms.
  6. Periodically, select Refresh to update the screen‘s counters to their latest value.
Published May 2018prev | next

Email this topicEmail this topic

Print this pagePrint this page