T5 Wireless Client

1. Select the Statistics menu from the Web UI.
2. Select the Wireless Controller node from the left navigation pane and select a T5 controller from amongst those displayed.
3. Select Wireless Clients from the left-hand side of the UI.
   The Wireless Clients screen displays the following:

   Device	Lists the name of the T5 controller managed CPE device radio detecting and reporting client information.
   MAC Address	Displays the factory encoded hardware MAC address assigned to the client as hardware identifier.
   SSID	Displays each listed client‘s SSID (service set id) used as a network identifier.
   Last RSSI	Lists a RSSI (relative signal strength indication) in dBm for client devices connected to the selected T5 controller and its managed CPE radios.
   Rx Packets	Displays the number of packets received by the listed T5 controller managed client.
   Tx Packets	Displays the number of packets transmitted by the listed T5 controller managed client.
   Association Status	Displays the association status of the wireless client.
   Authentication Status	Displays the authentication status of the wireless client.
   Retry Percentage	Displays the retry percentage for packets sent this wireless client. The retry rate helps assess the overall effectiveness of the RF environment (as displayed as a percentage) and a function of the connection rate in both directions.

4. Select Refresh to update the screen's statistics counters to their latest values.