Security

To define a dynamic routing configuration:

1. Select Configuration → Profiles → System Profile.

   A list of device profiles within the system is displayed.

2. Expand the Network menu and select OSPF.

3. Select the Add button to define a new set of virtual interface basic settings, or Edit to update the settings of an existing virtual interface configuration.

4. Select the Security tab.

   The VLAN Interface security configuration screen displays.

   

   OSPF - VLAN Interface Security Configuration Screen

   

5. Use the IPv4 Inbound Firewall Rules drop-down menu to select the IPv4 specific inbound firewall rules to apply to this profile‘s virtual interface configuration. Select the Create icon to define a new IPv4 firewall rule configuration or select the Edit icon to modify an existing configuration.

6. Use the IPv6 Inbound Firewall Rules drop-down menu to select the IPv6 specific inbound firewall rules to apply to this profile‘s virtual interface configuration. Select the Create icon to define a new IPv6 firewall rule configuration or select the Edit icon to modify an existing configuration.

7. Use the VPN Crypto Map drop-down menu to select and apply a VPN crypto map entry to apply to the OSPF dynamic route.

   Crypto Map entries are sets of configuration parameters for encrypting packets passing through the VPN Tunnel. If a Crypto Map configuration does not exist suiting the needs of this virtual interface, select the Create icon to define a new Crypto Map configuration or the Edit icon to modify an existing configuration.

8. Select OK to save the changes to the OSPF route security configuration. Select Reset to revert to the last saved configuration.