AP VPN IKESA

The IKESA screen allows for the review of individual peer security association statistics.

To view an access point's IKESA statistics:

1. Select the Statistics menu from the Web UI.
2. Expand the System node from the navigation pane (on the left-hand side of the screen). The System node expands to display the RF Domains created within the managed network.
3. Expand an RF Domain node, and select one of it's connected access points. The access point's statistics menu displays in the right-hand side of the screen, with the Health tab selected by default.
4. Expand the VPN menu.
5. Select IKESA.
   The Statistics > AP > VPN > IKESA screen displays in the right-hand pane.

   

   

   Review the following VPN peer security association statistics:

   Peer	Lists peer IDs for peers sharing SA for tunnel interoperability. When a peer sees a sensitive packet, it creates a secure tunnel and sends the packet through the tunnel to its destination.
   Version	Displays each peer's IKE version used for auto IPSec secure authentication with the IPSec gateway and other controllers or service platforms.
   State	Lists the state of each listed peer's SA (whether established or not).
   Lifetime	Displays the lifetime for the duration of each listed peer IPSec VPN security association. Once the set value is exceeded, the association is timed out.
   Local IP Address	Displays each listed peer's local tunnel end point IP address. This address represents an alternative to an interface IP address.

6. Select a IKE peer configuration and click Clear to remove the peer from the table.
7. Select Clear All to clear each peer of its current status and begin a new data collection.
8. Select Refresh to update the screen's statistics counters to their latest values.