The access point‘s profile can be applied to customize
the port channel configurations as part of its interface configuration.
Note
WiNG 7.1 does not provide port-channel configuration on AP505
and AP510 model access points.
To review an access point's existing VLAN
configurations
Go to Configuration →
Devices → Device Overrides.
The Device
Overrides screen displays. This screen lists devices within
the managed network.
Select an access point.
The selected access point's configuration menu displays.
Expand Interface and
select Port
Channels.
The existing port channel configurations are displayed.
Profile Overrides -
Interface - Port Channels - Main Screen
Review existing port channel
configurations and their status to determine whether a parameter requires an
override.
Name
The port channel's numerical identifier assigned when it
was created. The numerical name cannot be modified as
part of the edit process.
Type
Whether the type is port channel.
Description
A short description (64 characters maximum) describing
the port channel or differentiating it from others with
similar configurations.
Admin Status
A green check mark means the listed port channel is
active and currently enabled with the profile. A red “X”
means the port channel is currently disabled and not
available for use. The interface status can be modified
with the port channel configuration as required.
