Configuring Pre-Master Polling
If you enable the use of ELRP by ESRP in the pre-master state,
ESRP requests ELRP packets sent to ensure that there is no loop in the network
before changing to the master state. If no packets are received, there is no loop in
the network. By default, the use of ELRP by ESRP in the pre-master state is
disabled.
-
To enable the use of ELRP by ESRP in
the pre-master state on a per-ESRP domain basis, and to configure
how often and how many ELRP PDUs are sent in the pre-master state,
use the following command:
-
To disable the use of ELRP by ESRP in the pre-master
state, use the following command: