The Protect VLAN contains the EAPS primary and secondary ports as tagged VLAN ports.
Additional VLAN ports connected to client devices such as a PC could be untagged or
tagged. The following commands accomplish these tasks and should be repeated for all
additional protected VLANs:
* Edge-Switch#1:10 # create vlan purple-1
* Edge-Switch#1:11 # configure purple-1 tag 1
* Edge-Switch#1:12 # configure purple-1 add port 49,50 tagged
* Edge-Switch#1:13 # configure purple-1 add port 1 untagged
* Edge-Switch#1:14 # configure eaps e1-domain add protect vlan purple-1