The following table describes the keys used to control the displays that appear if you use any of the show ports commands without specifying the no-refresh parameter (this is the default behavior).
Key(s) | Description |
---|---|
U | Displays the previous page of ports. |
D | Displays the next page of ports. |
[Esc] | Exits from the screen. |
0 | Clears all counters. |
[Space] | Cycles through the following screens:
Note: Available only using the show
ports utilization command.
|
The following table describes the keys used to control the displays that appear if you use any of the show ports commands and specify the no-refresh parameter.
Key | Description |
---|---|
Q | Exits from the screen. |
[Space] | Displays the next page of ports. |