Configuring TDM Services

To create or delete a TDM service, use the following commands:
create tdm service circuit service_name

delete tdm service circuit [service_name | all]
To add a port or port/time-slot to a TDM service, use the following command:
configure tdm service circuit service_name add port port {time-slots [time_slot_list | all]}
To delete a port from a TDM service, use the following command:
To configure the idle code and seized code, use the following command:
configure tdm service circuit service_name seized-code seized_code
To configure the trunk-conditioning value for alarm conditions, use the following command:
configure tdm service circuit service_name trunk-conditioning trunk_conditioning

Note

A given {TDM port, time-slot} combination cannot belong to more than one TDM service.
A TDM service can belong to only one TDM pseudowire
In the framed mode of operation on E1 hierarchy, timeslot 1 cannot be added to a TDM service. Additionally, if TDM port is configured as multiframed, timeslot 17 cannot be added to a TDM service.
Time-slots from different TDM ports cannot belong to the same TDM service.

Published March 2020prev | next