Perform this task if the combination of AC inputs represents one of
those listed in the following table. You can override automatic power supply management to
enable a PSU with 110V AC inputs that ExtremeXOS disables if the need arises, such as for a
planned maintenance of 220V AC circuits.
Note
If
you override automatic power supply management, you may reduce the available power and cause
one or more I/O modules to power down.
To turn on a disabled PSU, use the following
command:
configure power supply ps_num
on
To resume using automatic power supply management on a
PSU, use the following command:
configure
power supply ps_numauto
The setting for each PSU is stored as
part of the switch configuration.
To display power supply status and power budget
information, use the following commands:
Print
this page
Email this topic
Feedback
View PDF
Download EPUB