Creating and Configuring the EAPS Shared Ports
Create the EAPS shared ports,
which are used to connect a common-link between the aggregate switches.
On the first switch, define the shared port mode as partner, and define the link ID.
Repeat this step on the other aggregate switch, but configure the shared port mode as
controller. The link ID matches the value configured for the partner.
The following shows an example configuration for the
partner:
* AGG-SWITCH#2.37 # create eaps shared-port 2:1
* AGG-SWITCH#2.38 # configure eaps shared-port 2:1 mode partner
* AGG-SWITCH#2.39 # configure eaps shared-port 2:1 link-id 21
Print
this page
Email this topic
Feedback
View PDF
Download EPUB