I/O and Fabric Module LED Behavior--BlackDiamond X8 Switch
The following table describes the BlackDiamond X8 switch I/O and fabric module LED
behavior during a diagnostic test.
After the I/O or Fabric module completes the diagnostic test, or the
diagnostic test is terminated, the DIAG and the Status LEDs are reset. During normal
operation, the DIAG LED is off and the Status LED blinks green.
BlackDiamond X8 Series Switch I/O and Fabric Module
LED Behavior
LED |
Color |
Indicates |
DIAG |
Amber blinking |
Diagnostic test in
progress |
|
Amber |
Diagnostic failure has
occurred |
Status |
Amber blinking |
Configuration error, code
version error, or other severe module error |
|
Green blinking |
Normal operation |
|