Summary of Tasks
To perform a hitless upgrade to install and upgrade the ExtremeXOS software on your
system:
-
View the current switch information with the
show switch
command.
-
Determine your selected and booted image
partitions.
-
Verify which MSM is the primary and which is the backup.
-
Confirm that the MSMs are synchronized.
-
Select the inactive partition to download the
image to (and the partition to boot from after installing the image).
-
Download and install the new ExtremeXOS core image on
the backup MSM.
-
Reboot this MSM.
-
Verify that the backup MSM comes up correctly and that
the MSMs are synchronized.
-
Initiate failover from the primary MSM to the backup
MSM.
The backup MSM now becomes the new
primary MSM.
-
Verify that the MSMs come up correctly and that they
are synchronized.
-
Download and install the new ExtremeXOS core image on
the original primary MSM (new backup MSM).
-
Reboot this MSM.
-
Verify that the new backup MSM comes up correctly and
that the MSMs are synchronized.
-
Initiate failover from the new primary MSM to the new
backup MSM.
This optional step restores the switch to the
original primary and backup MSM.
-
Confirm that the failover is successful.
This optional step confirms which MSM is the
primary or the backup.