Configuring TDM MEF-8 SAToP Pseudowwire

Create TDM Service Circuit.

On the left E4G-200 Switch:

create tdm service circuit "mef8-satop-s3"
configure tdm service circuit "mef8-satop-s3" add port 19

On the right E4G-400 Switch:

create tdm service circuit "mef8-satop-s3"
configure tdm service circuit "mef8-satop-s3" add port 42

Create CES and add the TDM Service circuit.

On the left E4G-200 Switch:

create ces mef8-ces3 psn mef8
configure ces mef8-ces3 add service mef8-satop-s3

On the right E4G-400 Switch:

create ces mef8-ces3 psn mef8
configure ces mef8-ces3 add service mef8-satop-s3

Configure the L2 transport VLAN to reach the PW peer.

On the left E4G-200 Switch:

create vlan "vt2"
configure vlan vt2 tag 130
configure vlan vt2 add ports 1 tagged

On the right E4G-400 Switch:

create vlan "vt2"
configure vlan vt2 tag130
configure vlan vt2 add ports 10 tagged

Add peer to the CES.

On the left E4G-200 Switch:

configure ces mef8-ces3 add peer mac-address 00:00:45:56:02:13 ecid local 1001 remote 1001 vlan vt2

On the right E4G-400 Switch:

configure ces mef8-ces3 add peer mac-address 00:00:00:05:65:12 ecid local 1001 remote 1001 vlan vt2

Published March 2020prev | next