configure timezone name MET 60 autodst name MDT begins every last sunday march at 1 30 ends every last sunday october at 1 30
configure timezone name NZST 720 autodst name NZDT 60 begins every first sunday october at 2 00 ends on 3 16 2004 at 2 00
tz_name | Specifies an optional name for this timezone specification. May be up to six characters in length. The default is an empty string. |
GMT_offset | Specifies a Greenwich Mean Time (GMT) offset, in + or - minutes. |
autodst | Enables automatic Daylight Saving Time. |
dst_timezone_ID | Specifies an optional name for this Daylight Saving Time specification. May be up to six characters in length. The default is an empty string. |
dst_offset | Specifies an offset from standard time, in minutes. Value is from 1–60. The default is 60 minutes. |
floatingday | Specifies the day, week, and month of
the year to begin or end Daylight Saving Time each year. Format is
week
day
month where:
|
absoluteday |
Specifies a specific day of a specific
year on which to begin or end DST. Format is month
day
year where:
|
time_of_day_hour | Specifies the time of day to begin or end Daylight Saving Time. May be specified as an hour (0–23). The default is 2. |
time_of_day_minutes | Specify the minute to begin or end Daylight Saving Time. May be specified as a minute (0–59). |
noautodst | Disables automatic Daylight Saving Time. |
The following two examples use an IPv6 address as an NTP server and a hostname as an NTP server:
configure sntp-client primary fd98:d3e2:f0fe:0:54ae:34ff:fecc:892 configure sntp-client primary ntpserver.mydomain.com
The default sntp-client update-interval value is 64 seconds.
This command provides configuration and statistics associated with SNTP and its connectivity to the NTP server.
This command indicates the GMT offset, the Daylight Saving Time configuration and status, and the current local time.