SubVLAN Address Range Checking
You can configure subVLAN address ranges on each subVLAN to prohibit the entry of IP
addresses from hosts outside of the configured range.
-
To configure a subVLAN range, use the following
command:
configure vlan vlan_name
subvlan-address-range ip address1 - ip
address2
-
To remove a subVLAN address range, use the following
command:
unconfigure vlan vlan_name
subvlan-address-range
-
To view the subVLAN address range, use the following
command:
show vlan {virtual-router
vr-name}