Processing of Packets Received With
802.1p Priority 6
By default, 802.1p examination is turned on.
Priority 7 is mapped to QoS profile QP8, and priorities 6 through 0 are
mapped to QoS profile QP1. You can create other QoS profiles and can change this mapping as
needed. Since you cannot create QP7 in stacking mode, 802.1p examination always maps packets
with priority 6 to other
CoS
levels. However, you can use an ACL rule entry to set the 802.1p egress value to 6 without
affecting the QoS profile assignment as shown in the example
below:
entry VoIPinSummitStack { if { IP-TOS 46; } then { replace-dot1p-value 6; } }