Preface
ExtremeSwitching Switches
Power Supplies for Use with Your Switch
Expansion Modules
Site Preparation
Building Stacks
Installing Your Extreme Networks Switch
Installing External Power Supplies
Installing Expansion Modules
Replacing AC Power Supplies
Replacing DC Power Supplies
Replace Fan Modules
Removing and Replacing Expansion Modules
Removing Switches from Service
Technical Specifications
Safety and Regulatory Information

Preparing the Cables for a 750 W DC Power Supply

You will need three cable wires for each installed DC power supply: two input cables and a grounding cable. We recommend that each cable have differently colored insulation, as described in Required Tools and Materials for Installing a 750 W DC Power Supply.

To prepare the cable wires, follow these steps:

On each cable wire, strip 6 mm (0.25 inch) of insulation from one end.
Repeat the previous step for the other two cable wires.

Published December 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback