Preparing the Cables for a 550 W DC Power Supply

Three spade-type terminals are provided with the power supply.

You need a crimping tool to attach the terminals to the power and ground cables.

To prepare the cable wires, follow these steps:

On each cable wire, strip 6 mm (0.25 inch) of insulation from one end.
Insert the end of one power cable wire all the way into the barrel of a spade terminal and crimp the terminal securely to the wire.

Attaching a Spade Terminal to a Cable
Repeat step 2 for the other power cable wire and for the ground wire.

Published December 2020prev | next