Preface
ExtremeSwitching Switches
Power Supplies for Use with Your Switch
Expansion Modules
Site Preparation
Building Stacks
Installing Your Extreme Networks Switch
Installing External Power Supplies
Installing Expansion Modules
Replacing AC Power Supplies
Replacing DC Power Supplies
Replace Fan Modules
Removing and Replacing Expansion Modules
Removing Switches from Service
Technical Specifications
Safety and Regulatory Information

Replacing a Summit 1100 W DC Power Supply

The ExtremeSwitching X690 and X870 series switches accommodate one or two Summit 1100 W DC power supply units (PSUs) with either front-to-back or back-to-front airflow.

Note

The X690 and X870 models also can accommodate one or two 770 W AC PSUs. For information on replacing those units, see Replacing a Summit 770 W AC Power Supply. Bear in mind that you cannot combine power supplies of different wattages in the same switch.

You need the following tools and materials to replace an 1100 W DC power supply:

#1 Phillips screwdriver
Torque screwdriver and wrench or torque driver with attachments for tightening screws and nuts
Thermal protective gloves (required for removal of a power supply)

Published December 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback