Preparing the Cables for a 300 W DC Power Supply

1. On each cable wire, strip 6 mm (0.25 inch) of insulation from one end.
2. Insert the end of one power cable wire all the way into the barrel of a spade terminal and crimp the terminal securely to the wire.
   

   Attaching a Spade Terminal to a Cable

   
3. Repeat step Preparing the Cables for a 300 W DC Power Supply for the other power cable wire.
4. Insert the end of the stripped ground wire (green or green and yellow) all the way into the barrel of the ring terminal and crimp the terminal securely to the wire.
   

   Attaching a Ring Terminal to a Ground Cable