Connecting a SummitStack Cable to a Stacking Port

SummitStack cables are used to connect 20-Gbps SummitStack ports on the X460-G2 switch with the SummitStack plug-in module.

To connect a SummitStack cable, follow these steps:

  1. Align the cable connector with the stacking port connector on the rear of the first switch (see Connecting a SummitStack Cable).
  2. Firmly press the cable connector into place on the mating stacking port connector.
  3. Align and tighten the retaining screws on the cable connector.
  4. Repeat steps 1 through 3 to connect the cable to the second switch.
    Click to expand in new window
    Connecting a SummitStack Cable
    GUID-45108DAD-736E-45ED-890D-87E28F58D056-low.png
    Caution

    Caution

    Avoid making sharp bends in the cable. Sharp bends can stress the cable and cause damage.