Remove an IPv6 Static Route in a Non-default VRF

(Optional) View configured routes and confirm parameters.

device# show ipv6 route 2225::/32 vrf blue
IPv6 Routing Table for VRF "blue"
Total number of IPv6 routes: 10
'*' denotes best ucast next-hop
'[x/y]' denotes [preference/metric]

2225::/32
    *via 1200:3::1:2, Eth 2/47, [1/1], 0m5s, static, tag 0

device# show ipv6 route 2225::/32 vrf blue
Total number of IP routes: 0
device#

Access VRF configuration mode.

device# configure terminal
device(config)# vrf blue
device(config-vrf-blue)# address-family ipv6 unicast
device(vrf-blue-ipv6-unicast)#

Remove the static route, including the destination and next hop.
```
device(vrf-blue-ipv6-unicast)# no ipv6 route 2225::/32 1200:3::1:2 
```
You do not need to include cost metric, distance, or tag parameters.

(Optional) Confirm that the route was removed.

device# show ipv6 route 2225::/32 vrf blue
Total number of IP routes: 0
device#