-
Access global configuration
mode.
device# configure terminal
-
Access BGP configuration mode.
device(config)# router bgp
-
Access IPv4 address family
configuration mode.
device(config-bgp-router)# address-family ipv4 unicast
-
(For send mode only) Filter the
incoming route updates from a specified BGP neighbor.
device(config-bgp-ipv4u)# neighbor 10.1.2.3 prefix-list myprefixlist in
This example specifies the neighbor prefix-list command,
the IPv4 address of the neighbor, a prefix list named myprefixlist, and the
keyword in.
-
To advertise ORF send capabilities, run the neighbor capability orf
prefixlist command with the send keyword.
device(config-bgp-ipv4u)# neighbor 10.1.2.3 capability orf prefixlist send
-
To advertise ORF receive capabilities, run the neighbor capability orf
prefixlist command with the receive
keyword.
device(config-bgp-ipv4u)# neighbor 10.1.2.3 capability orf prefixlist receive
-
To advertise both ORF send and receive capabilities, run the neighbor
capability orf prefixlist command.
device(config-bgp-ipv4u)# neighbor 10.1.2.3 capability orf prefixlist
The following example summarizes the commands
for advertising ORF in receive mode.
device# configure terminal
device(config)# router bgp
device(config-bgp-router)# address-family ipv4 unicast
device(config-bgp-ipv4u)# neighbor 10.1.2.3 capability orf prefixlist receive
The following example summarizes the commands
for advertising ORF in send mode.
device# configure terminal
device(config)# router bgp
device(config-bgp-router)# address-family ipv4 unicast
device(config-bgp-ipv4u)# 10.1.2.3 prefix-list myprefixlist in
device(config-bgp-ipv4u)# 10.1.2.3 capability orf prefixlist send
The following example summarizes the commands
for advertising ORF in both send and receive modes.
device# configure terminal
device(config)# router bgp
device(config-bgp-router)# address-family ipv4 unicast
device(config-bgp-ipv4u)# neighbor 10.1.2.3 prefix-list myprefixlist in
device(config-bgp-ipv4u)# neighbor 10.1.2.3 capability orf prefixlist
