Configure the TCAM Profile for Layer 3 Gateway

Note

This procedure requires a system reload to activate the profile configuration.

1. Enter global configuration mode.
   

   device# configure terminal

2. Enter hardware configuration mode.
   

   device(config)# hardware

3. Specify the TCAM profile.
   

   device(config-hardware)# profile tcam default

   This example runs the profile tcam command with the default parameter.
4. Access privileged EXEC mode.
   

   device(config-hardware)# exit

5. Save the running configuration to the startup configuration file.
   

   device# copy running-config startup config

6. Activate the profile configuration.
   

   device# reload system

This example summarizes the commands in the procedure.

device# configure terminal
device(config)# hardware
device(config-hardware)# profile tcam default
device(config-hardware)# exit
device# copy running-config startup config
device# reload system