Enabling statistics for BGP flowspec rules

Perform the following steps to enable BGP flowspec statistics.

1. From privileged EXEC mode, enter global configuration mode.
   

   device# configure terminal

2. Enable BGP flowspec statistics.
   

   device(config)# ip flowspec rules statistics

3. Return to global configuration mode.
   

   device(config)# exit

4. Statistics for BGP flowspec can be displayed by using the show ip flowspec rules detail command.
   

   device# show ip flowspec rules detail 
   
   VRF :default-vrf 
   Total number of Rules: 1 
   
   1 Origin: Local(flowmap:23) Active: Yes 
     Match: 
        DSCP         <60 
     Actions: 
        Traffic-rate asn 666, rate 125000 bits/sec(operational-rate 132000 bits/sec) 
   
   Statistic         packets/bytes 
   -------------     ------------ 
      Matched           17412786/12589441782 
      Transmitted       1453/1048023
      dropped           17411333/12588393759 
   

The following example shows how to enable BGP flowspec statistics.

device# configure terminal
device(config)# ip flowspec rules statistics