-
Enter the
configure terminal command to access global configuration mode.
device# configure terminal
-
Enter the
ipv6 router ospf command to enter OSPFv3 router configuration mode and enable OSPFv3 globally.
device(config)# ipv6 router ospf
-
Enter the
distance command with the
intra-area parameter.
device(config-ipv6-router-ospf-vrf-default-vrf)# distance intra-area 80
The administrative distance for intra-area routes is changed from the default to 80.
-
Enter the
distance command with the
inter-area parameter.
device(config-ipv6-router-ospf-vrf-default-vrf)# distance inter-area 90
The administrative distance for inter-area routes is changed from the default to 90.
-
Enter the
distance command with the
external parameter.
device(config-ipv6-router-ospf-vrf-default-vrf)# distance external 100
The administrative distance for external routes is changed from the default to 100.
The following example changes the default administrative distances for intra-area routes, inter-area routes, and external routes.
device# configure terminal
device(config)# ipv6 router ospf
device(config-ipv6-router-ospf-vrf-default-vrf)# distance intra-area 80
device(config-ipv6-router-ospf-vrf-default-vrf)# distance inter-area 90
device(config-ipv6-router-ospf-vrf-default-vrf)# distance external 100
