The redistribution of static routes into IPv6 IS-IS is configured on device1. The redistribution of BGP routes into IPv6 IS-IS is configured on device2, and the BGP routes to be redistributed are specified.
-
On device1, enter the
configure terminal command to access global configuration mode.
device1# configure terminal
-
Enter the
router isis command to enter IS-IS router configuration mode and enable IS-IS on the device.
device1(config)# router isis
-
Enter the
address-family ipv6 unicast
command to enable ISIS address-family IPv6 unicast configuration mode.
device1(config-isis-router)# address-family ipv6 unicast
-
Enter the
redistribute command with the
static parameter to redistribute static routes.
device1(config-router-isis-ipv6u)# redistribute static
-
On device2, enter the
configure terminal command to access global configuration mode.
device2# configure terminal
-
Enter the
router isis command to enter IS-IS router configuration mode and enable IS-IS on the device.
device2(config)# router isis
-
Enter the
address-family ipv6 unicast
command to enable ISIS address-family IPv6 unicast configuration mode.
device2(config-isis-router)# address-family ipv6 unicast
-
Enter the
redistribute command with the
bgp and
route-map parameters to redistribute BGP routes and specify a route map.
device2(config-router-isis-ipv6u)# redistribute bgp route-map myroutemap
The following example redistributes static routes into IPv6 IS-IS on a device.
device# configure terminal
device(config)# router isis
device(config-isis-router)# address-family ipv6 unicast
device(config-router-isis-ipv6u)# redistribute static
The following example redistributes BGP routes into IPv6 IS-IS on a device and specifies a route map.
device# configure terminal
device(config)# router isis
device(config-isis-router)# address-family ipv6 unicast
device(config-router-isis-ipv6u)# redistribute bgp route-map myroutemap
