Configuring the default link metric value globally

1. Enter the configure terminal command to access global configuration mode.
   

   device# configure terminal

2. Enter the router isis command to enter IS-IS router configuration mode and enable IS-IS on the device.
   

   device(config)# router isis
   

3. Enter the address-family ipv4 unicast command to enable ISIS address-family IPv4 unicast configuration mode.
   

   device(config-isis-router)# address-family ipv4 unicast
   

4. Enter the default-link-metric command with the level-1 parameter, and specify a value, to set the IS-IS default link metric value for Level 1 for the IPv4 address family.
   

   device(config-router-isis-ipv4u)# default-link-metric level-1 30
   

The following example sets the IS-IS default link metric value for Level 1 for the IPv4 address family.

device# configure terminal
device(config)# router isis
device(config-isis-router)# address-family ipv4 unicast
device(config-router-isis-ipv4u)# default-link-metric level-1 30