The redistribution of both static routes and BGP routes into OSPFv3 is configured on device1. The redistribution of connected routes into OSPFv3 is configured on device2, and the connected routes to be redistributed are specified.
-
On device1, enter the
configure terminal command to access global configuration mode.
device# configure terminal
-
Enter the
ipv6 router ospf command to enter OSPFv3 router configuration mode and enable OSPFv3 on the device.
device(config)# ipv6 router ospf
-
Enter the
redistribute command with the
static parameter to redistribute static routes.
device(config-ipv6-router-ospf-vrf-default-vrf)# redistribute static
-
Enter the
redistribute command with the
bgp parameter to redistribute static routes.
device(config-ipv6-router-ospf-vrf-default-vrf)# redistribute bgp
-
On device2, enter the
configure terminal command to access global configuration mode.
device# configure terminal
-
Enter the
ipv6 router ospf command to enter OSPFv3 router configuration mode and enable OSPFv3 on the device.
device(config)# ipv6 router ospf
-
Enter the
redistribute command with the
connected and
route-map parameters to redistribute connected routes and specify a route map.
device(config-ipv6-router-ospf-vrf-default-vrf)# redistribute connected route-map rmap1
The following example redistributes static and BGP routes routes into OSPFv3 on a device.
device# configure terminal
device(config)# ipv6 router ospf
device(config-ipv6-router-ospf-vrf-default-vrf)# redistribute static
device(config-ipv6-router-ospf-vrf-default-vrf)# redistribute bgp
The following example redistributes connected routes into OSPFv3 on a device and specifies a route map.
device# configure terminal
device(config)# ipv6 router ospf
device(config-ipv6-router-ospf-vrf-default-vrf)# redistribute connected route-map rmap1
