Ensure that VRRPv2 or VRRP-Ev2 is configured and enabled in your network.
To determine the effect of clearing the VRRP statistics, an appropriate
show command is entered before and after the
clear command.
-
Enter the
end or
exit
command to return to privileged EXEC mode.
-
Enter the
show vrrp command with a virtual-group ID.
device# show vrrp 1
Total number of VRRP session(s) : 2
VRID 1
Interface: Ve 10; Ifindex: 1207959562
Mode: VRRP
Admin Status: Enabled
Description :
Address family: IPv4
Version: 2
.
.
.
Statistics:
Advertisements: Rx: 0, Tx: 60
Neighbor Advertisements: Tx: 30
-
Enter the clear vrrp
statistics command.
device# clear vrrp statistics
-
Enter the
show vrrp command with a virtual-group ID.
device# show vrrp 1
Total number of VRRP session(s) : 2
VRID 1
Interface: Ve 10; Ifindex: 1207959562
Mode: VRRP
Admin Status: Enabled
Description :
Address family: IPv4
Version: 2
.
.
.
Statistics:
Advertisements: Rx: 0, Tx: 6
Neighbor Advertisements: Tx: 3
In this show output after the
clear vrrp statistics command has been entered, you can see that the statistical counters have been reset. Although some of the counters are showing numbers because VRRP traffic is still flowing, the numbers are much lower (6 transmissions instead of 60 transmissions) than in the initial
show vrrp command output.
