Create an ARP Access Control List

1. Access global configuration mode.
   

   device# configure terminal

2. Create the ACL.
   

   device(config)# arp access-list ARP_ACL_01

   This example creates an ACL named ARP_ACL_01.
3. For each ACL rule, specify the IP address and MAC address pairs that are allowed access.
   

   device(config-arp-acl)# permit ip host 1.1.1.1 mac host 0020.2222.2222
   device(config-arp-acl)# permit ip host 1.1.1.2 mac host 0020.2222.2223

The following example summarizes the commands in this procedure.

device# configure terminal
device(config)# arp access-list ARP_ACL_01
device(config-arp-acl)# permit ip host 1.1.1.1 mac host 0020.2222.2222
device(config-arp-acl)# permit ip host 1.1.1.2 mac host 0020.2222.2223