Configure BGP4 Route Map Matching on a Next-hop Device

1. Access global configuration mode.
   

   device# configure terminal

2. Create a route map instance and allow a matching pattern.
   

   device(config)# route-map myhoproutemap1 permit 10

   This example creates a route map instance named myhoproutemap1 and allows a matching pattern of 10.
3. Configure the route map to match IP next-hop match conditions for a prefix list.
   

   device(config-route-map-myhoproutemap1/permit/10)# match ip next-hop prefix-list mylist

   This example configures the route map to match next-hop match conditions for the prefix list titled mylist.

The following example summarizes the commands in this procedure.

device# configure terminal
device(config)# route-map myhoproutemap1 permit 10
device(config-route-map-myhoproutemap1/permit/10)# match ip next-hop prefix-list mylist