Preface
ExtremeSwitching Switches
Power Supplies for Use with Your Switch
Expansion Modules
Site Preparation
Building Stacks
Installing Your Extreme Networks Switch
Installing External Power Supplies
Installing Expansion Modules
Replacing AC Power Supplies
Replacing DC Power Supplies
Replace Fan Modules
Removing and Replacing Expansion Modules
Removing Switches from Service
Technical Specifications
Safety and Regulatory Information

Replacing a 750 W Internal DC Power Supply

The ExtremeSwitching X695 switch can accommodate two 750 W DC power supply units (PSU) with either front-to-back or back-to-front airflow.

Note

For information on replacing those units, see Install a Replacement 750 W DC Power Supply. Bear in mind that you cannot combine power supplies of different wattages in the same switch.

You need the following tools and materials to replace an 750 W DC power supply:

#1 Phillips screwdriver
Torque screwdriver and wrench or torque driver with attachments for tightening screws and nuts
Thermal protective gloves (required for removal of a power supply)

Published December 2020prev | next

Email this topic

Print this page Print this page

Leave feedback Feedback