Configures MLAG LACP MAC on each of the MLAG peer switches. This MAC address will be used as the system identifier in the LACPDUs sent over the MLAG ports.
| mlag | Multi-switch link aggregation used to combine remote ports and local ports to a common logical connection. |
| peer_name | Alphanumeric string identifying the MLAG peer. |
| lacp-mac | MAC address to be used as the system identifier in LACPDU for MLAG ports. |
| auto | System identifier in LACPDU automatically uses switch MAC of MLAG peer with higher IP address for ISC control VLAN (default). |
| lacp_mac_address | MAC address. |
Auto.
This command is used to configure the System Identifier used in LACPDU for MLAG ports. The same value has to be configured on both the MLAG peers.
# configure mlag peer "peer1" lacp-mac auto # configure mlag peer "peer1" lacp-mac 00:01:02:03:04:05
This command was first available in ExtremeXOS 15.3.
This command is available on the ExtremeSwitching X440-G2, X450-G2, X460-G2, X465, X590, X620, X670-G2, X690, and X870 series switches.